Prices incl. VAT plus shipping costs
Ready to ship today,
Delivery time appr. 1-3 workdays
We're taking a winter break.
QuickTec takes a winter break from 21.12.2019 - 01.01.2020. Orders will be shipped until 20.12.2019. From 02.01.2020 we are again available for you as usual.
- Order number: 308280-10
Economy kit GreenLine underfloor heating with CompactFloor EXPERT – Maximum resilience of 5.0 kN/m²
When combined with a GreenLine underfloor heating, CompactFloor EXPERT provides a maximum performance for commercial buildings. With their resilience of 5.0 kN/m², the 20 mm thick fiber reinforced concrete elements transfer heat directly to the floor and offer a rapid heating. The installation heigt is 50 mm (excl. floor covering), so this variant is suitable for retrofitting. An underfloor heating with CompactFloor EXPERT can be laid with any floor covering, even large format tiles are possible.
The economy kit "GreenLine underfloor heating with CompactFloor EXPERT" includes all the items you need for the GreenLine underfloor heating system with CompactFloor EXPERT. Please note that unfavorable room geometries can lead to increased wastage. If the fixed kit sizes do not match your building project, we gladly create an individual offer for your project.
You can inform yourself here about determining the control components (heating circuit distributor, actuator and thermostat) required for underfloor heating.
The following articles are included in the economy kit. You will find an exact overview of the article quantities in the "Components" tab.
GreenLine system panels
GreenLine system panels consist of a 30 mm strong wood fibre insulation with pipe ducts. The pipe ducts are designed with a diameter of 16 mm for the QuickTherm heating pipe MVR. The heating pipe is easily fixed thanks to the clamping effect of pipe channels and the spacing of 16.7 cm is automatically maintained by the grid. The attached heat conducting plates made of aluminium ensure a fast and consistent heat dissipation on the flooring. All materials can be recycled separately.
GreenLine deflection bends
The deflection bends GreenLine consist of a 30 mm wooden fibre insulation and are used to guide the bend of the MVR heating pipe in the edge areas. Each panel consists of three deflection bends, which are cut into the wooden fibre insulation. Just like the system panels, pipe ducts and insulation were combined to simplify laying of the underfloor heating. Heat conducting sheets can also be applied to deflection bends if required.
GreenLine filling panel
GreenLine underfloor heating consists of easy-to-lay system elements. The GreenLine filling panel is a blank element of wooden fibres with a strength of 30 mm and is used in the edge area and for unheated areas. Pipe ducts for the heating pipe MVR can be cut in with a router..
Heat distribution plates
The aluminium heat distribution plates can be easily attached to the deflection bends and filling panels and ensure an even transfer of heat.
Heating pipe MVR
The heating pipe MVR with its diameter of 16x2.00 mm combines the benefits of aluminium and plastic. The pipe can be bent within it returning to its original position thanks to the inner aluminium layer. Furthermore, the aluminium reduces the thermal lengthways extension of the pipe considerably also making it suitable for use in underfloor heating in dry construction. Material: (PE-RT/AL/PE-RT)
Edge insulation strips
The edge insulation strips GreenLine consist of a double-layered corrugated board system with wax coating and assures acoustic decoupling between floors (dry screed and screed) and other components such as walls. Due to its flexibility, it compenssates the thermal expansion of screeds, so that it can be used for the standard-compliant production of edge joints.
Conductive layer CompactFloor EXPERT
The conductivity layer CompactFloor EXPERT is a modern advancement of load distributions layers in drywall constructions. The fiber reinforced concrete elements offer an installation height of 20 mm and a high load capacity of 5.0 kN / m².
CompactFloor EXPERT epoxi glue
The solvent-free epoxi glue consists of two components and is used to adhere the CompactFloor EXPERT elements.
The separating foil separates the underfloor heating and the load distribution layer CompactFloor EXPERT.
Adhesive tape for seperating foil
The separating foil can be easily applied with the 50 mm PP adhesive tape.
Please note: The economy kits are indivisible packages, a return of individual components is not possible.
|suitiable floor covering:||Carpet, Design flooring, Laminate, Linoleum, Parquet, PVC, Tiles, Vinyl, Wooden floor boards|
|Installation height (without floor covering):||50 mm|
|Load distribution layer:||CompactFloor EXPERT|
The kit includes the following components
|Art-Nr.||Article||10 m²||15 m²||20 m²||30 m²||40 m²||50 m²||60 m²||70 m²||80 m²||90 m²||100 m²|
|301201||System panel Greenline||15 pcs.||22 pcs.||29 pcs.||44 pcs.||58 pcs.||73 pcs.||87 pcs.||102 pcs.||116 pcs.||131 pcs.||145 pcs.|
|301202||Deflection bends GreenLine||5 pcs.||5 pcs.||10 pcs.||15 pcs.||20 pcs.||25 pcs.||30 pcs.||35 pcs.||40 pcs.||45 pcs.||50 pcs.|
|301203||Filling panel GreenLine||3 pcs.||5 pcs.||6 pcs.||9 pcs.||12 pcs.||15 pcs.||18 pcs.||21 pcs.||24 pcs.||27 pcs.||30 pcs.|
|300016||Heating pipe MVR||60 m||100 m||120 m||200 m||250 m||300 m||360 m||430 m||500 m||550 m||600 m|
|301004||Heat distribution plate||10 pcs.||15 pcs.||20 pcs.||29 pcs.||39 pcs.||48 pcs.||58 pcs.||68 pcs.||77 pcs.||87 pcs.||96 pcs.|
|301105||Edge insulation strips (GreenLine)||25 m||25 m||25 m||50 m||50 m||50 m||75 m||75 m||100 m||100 m||100 m|
|301130||Separating foil||100 m||100 m||100 m||100 m||100 m||100 m||100 m||100 m||100 m||100 m||100 m|
|301131||Adhesive tape for separating foil||66 m||66 m||66 m||66 m||66 m||66 m||132 m||132 m||132 m||132 m||132 m|
|302010||CompactFloor EXPERT 20||42 pcs.||63 pcs.||84 pcs.||126 pcs.||168 pcs.||210 pcs.||252 pcs.||294 pcs.||336 pcs.||378 pcs.||420 pcs.|
|302201||CompactFloor EXPERT epoxi glue||6 kg||12 kg||12 kg||18 kg||24 kg||30 kg||36 kg||42 kg||48 kg||56 kg||60 kg|