Tools for wall heating

Close filters
from to
1 From 2
No results were found for the filter!
Werkzeug-Set (Kaufartikel) Tool set (purchased item)
The tool set contains all of the tools you require to lay the QuickTherm underfloor heating. Please note that this item is a purchased item. The tool set contains the following products: • Aluminium tool box • Pipe winder • Dispenser •...
Content 1 package(s)
€1,850.00 *
Rohrschere Pipe cutters
The QuickTherm pipe cutters produce a straight cut without crushing the pipe. They are suitable for the MVR heating pipe.
Content 1 piece
€175.00 *
Manual crimping pliers Manual crimping pliers
Press fittings such as the press coupling MVR can be connected with the QuickTherm MVR heating pipe using the QuickTherm manual crimping pliers. • Not suitable for multiple layer composite pipes and fittings from other manufacturers •...
Content 1 piece
€490.00 *
Calibration tool Calibration tool
The QuickTherm calibration tool centers the MVR heating pipe and produces an all-round inner and outer chamfer. Calibration of multiple layer composite pipes, such as QuickTherm MVR heating pipe is essential to avoid damages to the...
Content 1 piece
From €49.90 *
Nutenschneider Groove cutter
The QuickTherm groove cutter can be used to produce individual pipe ribs on filling panels in the edge area or in front of the distributor. The groove cutter penetrates deep enough into the QuickTherm filling panel so that the Quicktherm...
Content 1 piece
€395.00 *
Rohrhaspel Pipe winder
Laying underfloor heating is even easier with the QuickTherm pipe winder. Coils that mean the MVR heating pipe can be simply unrolled. The pipe winder can be folded and easily stored away. It can be adjusted to standard coils with the...
Content 1 piece
€390.00 *
Außenbiegefeder Outer bending spring
The MVR heating pipe can be bent by hand in small radii with the QuickTherm outer bending spring. This means that the heating pipe is not bent. The outer bending spring is designed for multiple layer composite pipes MVR 16 x 2.00 mm
Content 1 piece
€13.60 *
Innenbiegefeder Inner bending spring
The MVR heating pipe can be bent by hand in small radii with the QuickTherm inner bending spring. This means that the heating pipe is not bent. The inner bending spring is designed for multiple layer composite pipes MVR 16 x 2.00 mm
Content 1 piece
€10.50 *
Wechseleinsatz Spare insert
Crimping jaw insert for the QuickTherm manual crimping pliers. Available in sizes: • 16 mm and • 20 mm
Content 1 piece
€85.90 *
Aufnahme Schneidspitze Nut Insert for straight cutting tip
Spare insert for the cutting tip groove on QuickTherm groove cutter
Content 1 piece
€88.90 *
Schneidspitze Nut (Ersatz) Grooved cutting tip (spare)
Individual pipe ducts for the MVR heating pipe can be cut into the QuickTherm filling panels with the spare grooved cutting tip. The cutting tip is designed for the QuickTherm groove cutter
Content 1 piece
€42.90 *
Abroller Roller
Sturdy packing tape roller for easy attachment of QuickTherm separating foil - with blade protector for safe application.
Content 1 piece
€21.75 *
1 From 2
Viewed