Underfloor heating components

QuickTherm underfloor heating consists of easy-to-lay system panels. The system panels combine the pipe duct and insulation (EPS DEO WLG 035) at a height of just 30 mm. The pipe ducts are designed for the QuickTherm MVR heating pipe....

The QuickTherm heat distribution plate ensures even transfer of heat to the deflection bends and in edge areas of the underfloor heating. Thanks to the sticky strip on the back, it can be easily attached to the QuickTherm deflection...

QuickTherm underfloor heating consists of easy-to-lay system elements. The QuickTherm filling panel is a blank element and is used in the edge area and for unheated areas. Just like all QuickTherm system elements, the filling panels are...

QuickTherm underfloor heating consists of easy-to-lay system elements. The deflection bends are used to guide the bend of the QuickTherm MVR heating pipe in the edge area. 6 deflection bends are found on each bend plate, which can be...

The heating pipe MVR is laid in the QuickTherm underfloor heating pipe ducts. The aluminium multiple layer composite pipes unite the advantages of aluminium and plastic. The pipe can be bent within it returning to its original position...

The heating pipe MVR is laid in the QuickTherm underfloor heating pipe ducts. The aluminium multiple layer composite pipe unites the advantages of aluminium and plastic. The pipe can be bent within it returning to its original position...

QuickTherm edge insulation strips consist of PE foam and ensure soundproofing between screeds (dry screed and wet screed) and other components such as walls for example. Due to its flexibility, it also compensates thermal length...

QuickTherm edge insulation strips consist of PE foam and ensure soundproofing between screeds (dry screed and wet screed) and other components such as walls for example. Due to its flexibility, it also compensates thermal length...

The QuickTherm press coupling MVR produces an interlocking and permanently tight connection between two multiple layer composite pipes. It is suitable for the QuickTherm heating pipe MVR (PE-RT/AL/PE-RT) ø 16 x 2.00 mm. Please note: the...

The QuickTherm push coupling produces an interlocking and permanently tight connection between two multiple layer composite pipes, such as the MVR heating pipe. The QuickTherm push coupling cannot be dismantled. • MVR 16 x 2.00 mm x MVR...

The QuickTherm Press-angle 90° MVR produces a positive and permanent tight connection between two multilayer pipes at an angle of 90°. The QuickTherm Press-angle is suitable for the heating pipe QuickTherm MVR (PE-RT/AL/PE-RT) ø 16x2,00...

The QuickTherm plug-angle 90° MVR produces a form-fitting and durable tight transition between two multilayer pipes in an 90° angle. The QuickTherm plug-angle is suitable for the heating pipe QuickTherm MVR (PE-RT/AL/PE-RT) ø 16x2,00 mm....