Prices incl. VAT plus shipping costs
Ready to ship today,
Delivery time appr. 1-3 workdays
We're taking a winter break.
QuickTec takes a winter break from 21.12.2019 - 01.01.2020. Orders will be shipped until 20.12.2019. From 02.01.2020 we are again available for you as usual.
- Order number: 308170-10
Economy kit QuickTherm underfloor heating with CompactFloor PRO: maximum performance with only 42 mm installation height
CompactFloor maximises the performance of a QuickTherm underfloor heating, because the conductive layer ensures an optimal heat transfer to the floor covering. CompactFloor PRO 12 is suitable for every floor covering and offers low installation heights from 42 mm.
The economy kit "underfloor heating with CompactFloor PRO" includes all the items you need for the QuickTherm underfloor heating system for later use with CompactFloor PRO. Please note that unfavorable room geometries can lead to increased wastage. If the fixed kit sizes do not match your building project, we gladly create an individual offer for your project.
You can inform yourself here about determining the control components (heating circuit distributor, actuator and thermostat) required for underfloor heating.
The following articles are included in the economy kit. You will find an exact overview of the article quantities in the "Components" tab.
QuickTherm system panels
The underfloor heating system panels combine the pipe duct and insulation (EPS DEO WLG 035) and ensure an easy installation. Thanks to the pipe ducts, the heating pipe must not be inconveniently fixed - the laying clearance of 166 mm is automatically maintained. The system panels are provided with predetermined breaking points and can therefore be customised to the room without the use of tools. The attached heat conducting plates made of aluminium ensure a quick, complete and even transfer of heat to the floor covering.
QuickTherm deflection bends
The deflection bends are used to guide the bend of the QuickTherm MVR heating pipe in the edge area. Just like the QuickTherm system panels, the pipe duct and insulation (EPS DEO WLG 035) are combined. 6 deflection bends are found on each bend plate, which can be individual separated without the use of tools due to the predetermined breaking point.
QuickTherm filling panel
The QuickTherm filling panel is a blank element and is used in the edge area and for unheated areas. The QuickTherm groove cutter can be used to cut pipe ducts into the filling panel to take the QuickTherm MVR heating pipe.
QuickTherm heat distribution plates
The aluminium QuickTherm heat distribution plates can be easily attached to the QuickTherm deflection bends and filling panels and ensure an even transfer of heat.
Heating pipe MVR
The heating pipe MVR with its diameter of 16x2.00 mm combines the benefits of aluminium and plastic. The pipe can be bent within it returning to its original position thanks to the inner aluminium layer. Furthermore, the aluminium reduces the thermal lengthways extension of the pipe considerably also making it suitable for use in underfloor heating in dry construction. Material: (PE-RT/AL/PE-RT)
Edge insulation strips
QuickTherm edge insulation strips consist of PE foam and ensure soundproofing between screeds (dry screed and wet screed) and other components such as walls for example. Due to its flexibility, it also compensates thermal length elongation in screeds.
Conductive layer CompactFloor PRO
The universal conductive layer CompactFloor PRO 12 is the ideal complement to a QuickTherm underfloor heating. With its installation height of only 12 mm, the cement fibre based load distribution layer combines the advantage of a classic screed (high thermal conductivity) with the advantages of drywall construction (no moisture, low storage mass). This increases the performance of your underfloor heating – without inertia, but with huge energy savings.
CompactFloor PRO hybrid glue
CompactFloor PRO hybrid glue ist needed for the installation of CompactFloor PRO conductive layers. The hybrid is solvent-free and ensures a rapid full curing.
Please note: The economy kits are indivisible packages, a return of individual components is not possible.
|suitiable floor covering:||Carpet, Design flooring, Laminate, Linoleum, Parquet, PVC, Tiles, Vinyl, Wooden floor boards|
|Installation height (without floor covering):||42 mm|
|Load distribution layer:||CompactFloor PRO 12|
The kit includes the following components
|Art-Nr.||Artikel||10 m²||15 m²||20 m²||30 m²||40 m²||50 m²||60 m²||70 m²||80 m²||90 m²||100 m²|
|301001||System panel||15 pcs.||22 pcs.||29 pcs.||44 pcs.||58 pcs.||73 pcs.||87 pcs.||102 pcs.||116 pcs.||131 pcs.||145 pcs.|
|301002||Deflection bends||3 pcs.||4 pcs.||5 pcs.||8 pcs.||10 pcs.||13 pcs.||15 pcs.||18 pcs.||20 pcs.||23 pcs.||25 pcs.|
|301003||Filling panel||3 pcs.||5 pcs.||6 pcs.||9 pcs.||12 pcs.||15 pcs.||18 pcs.||21 pcs.||24 pcs.||27 pcs.||30 pcs.|
|300016||Heating pipe MVR||60 m||100 m||120 m||200 m||250 m||300 m||360 m||430 m||500 m||550 m||600 m|
|301004||Heat distribution plate||10 pcs.||15 pcs.||20 pcs.||29 pcs.||39 pcs.||48 pcs.||58 pcs.||68 pcs.||77 pcs.||87 pcs.||96 pcs.|
|301100||Edge insulation strips (dry screed)||50 m||50 m||50 m||50 m||50 m||50 m||100 m||100 m||100 m||100 m||100 m|
|302010||CompactFloor PRO 12||12 pcs.||18 pcs.||24 pcs.||36 pcs.||48 pcs.||60 pcs.||72 pcs.||84 pcs.||96 pcs.||108 pcs.||120 pcs.|
|302201||CompactFloor Hybrid glue||2 pcs.||3 pcs.||4 pcs.||6 pcs.||8 pcs.||10 pcs.||12 pcs.||14 pcs.||16 pcs.||18 pcs.||20 pcs.|