Prices incl. VAT plus shipping costs
Ready to ship today,
Delivery time appr. 1-3 workdays
- Order number: 308110-10
Economy kit QuickTherm underfloor heating for laminate & parquet with a low height of only 32 mm & quick installation in dry construction.
The QuickTherm underfloor heating for laminate and ready-to-lay parquet offers especially low installation heights of only 32 mm plus flooring. Due to the low installation height and the rapid laying, this floor heating can be retrofitted particularly well in the renovation. Laminate and ready-to-lay parquet are laid directly on the underfloor heating system with the footfall sound reducing thermal conductivity layer CompactFloor DIRECT. At the same time, CompactFloor DIRECT protects the substrate against moisture.
The economy kit "underfloor heating for laminate and parquet" includes all the items you need for the QuickTherm underfloor heating system for later use with laminate or ready-to-lay parquet. Please note that unfavorable room geometries can lead to increased wastage. If the fixed kit sizes do not match your building project, we gladly create an individual offer for your project.
You can inform yourself here about determining the control components (heating circuit distributor, actuator and thermostat) required for underfloor heating.
The following articles are included in the economy kit. You will find an exact overview of the article quantities in the "Components" tab.
QuickTherm system panels
The underfloor heating system panels combine the pipe duct and insulation (EPS DEO WLG 035) and ensure an easy installation. Thanks to the pipe ducts, the heating pipe must not be inconveniently fixed - the laying clearance of 166 mm is automatically maintained. The system panels are provided with predetermined breaking points and can therefore be customised to the room without the use of tools. The attached heat conducting plates made of aluminium ensure a quick, complete and even transfer of heat to the floor covering.
QuickTherm deflection bends
The deflection bends are used to guide the bend of the QuickTherm MVR heating pipe in the edge area. Just like the QuickTherm system panels, the pipe duct and insulation (EPS DEO WLG 035) are combined. 6 deflection bends are found on each bend plate, which can be individual separated without the use of tools due to the predetermined breaking point.
QuickTherm filling panel
The QuickTherm filling panel is a blank element and is used in the edge area and for unheated areas. The QuickTherm groove cutter can be used to cut pipe ducts into the filling panel to take the QuickTherm MVR heating pipe.
QuickTherm heat distribution plates
The aluminium QuickTherm heat distribution plates can be easily attached to the QuickTherm deflection bends and filling panels and ensure an even transfer of heat.
Heating pipe MVR
The heating pipe MVR with its diameter of 16x2.00 mm combines the benefits of aluminium and plastic. The pipe can be bent within it returning to its original position thanks to the inner aluminium layer. Furthermore, the aluminium reduces the thermal lengthways extension of the pipe considerably also making it suitable for use in underfloor heating in dry construction. Material: (PE-RT/AL/PE-RT)
Edge insulation strips
QuickTherm edge insulation strips consist of PE foam and ensure soundproofing between screeds (dry screed and wet screed) and other components such as walls for example. Due to its flexibility, it also compensates thermal length elongation in screeds.
Conductive layer CompactFloor DIRECT
CompactFloor DIRECT is a footfall sound insulating conductive layer for underfllor heating with a thickness of only 1.5 mm. It is simply rolled out on the underfloor heating, the joints are taped with aluminium tape. Afterwards, laminate and ready-to-lay parquet can be applied floating – without glueing and drying time.
Aluminium tape for CompactFloor DIRECT
The aluminium tape is used to join the edges of the CompactFloor DIRECT mats.
The universal fixing is used to adhere the system panels to the substrate. This is necessary for this installation in order to ensure stability.
StabiFix stabilisation strip
The StabiFix stabilisation strips are laid in doorways and below fixed installation such as kitchen units. They ensure an even more robust installation.
Please note: The economy kits are indivisible packages, a return of individual components is not possible.
|Load distribution layer:||CompactFloor DIRECT|
|Installation height (without floor covering):||32 mm|
|suitiable floor covering:||Laminate, Parquet|
The kit includes the following components
|Art-Nr.||Item||10 m²||15 m²||20 m²||30 m²||40 m²||50 m²||60 m²||70 m²||80 m²||90 m²||100 m²|
|301001||System panel||15 pcs.||22 pcs.||29 pcs.||44 pcs.||58 pcs.||73 pcs.||87 pcs.||102 pcs.||116 pcs.||131 pcs.||145 pcs.|
|301002||Deflection bends||3 pcs.||4 pcs.||5 pcs.||8 pcs.||10 pcs.||13 pcs.||15 pcs.||18 pcs.||20 pcs.||23 pcs.||25 pcs.|
|301003||Filling panel||3 pcs.||5 pcs.||6 pcs.||9 pcs.||12 pcs.||15 pcs.||18 pcs.||21 pcs.||24 pcs.||27 pcs.||30 pcs.|
|300016||Heating pipe MVR||60 m||100 m||120 m||200 m||250 m||300 m||360 m||430 m||500 m||550 m||600 m|
|301004||Heat distribution plate||10 pcs.||15 pcs.||20 pcs.||29 pcs.||39 pcs.||48 pcs.||58 pcs.||68 pcs.||77 pcs.||87 pcs.||96 pcs.|
|301100||Edge insulation strips (dry screed)||50 m||50 m||50 m||50 m||50 m||50 m||100 m||100 m||100 m||100 m||100 m|
|302220||CompactFloor DIRECT||2 pcs.||2 pcs.||3 pcs.||5 pcs.||5 pcs.||7 pcs.||8 pcs.||9 pcs.||10 pcs.||12 pcs.||13 pcs.|
|302221||Aluminium tape for CompactFloor DIRECT||50 m||50 m||50 m||50 m||50 m||100 m||100 m||100 m||100 m||150 m||150 m|
|301102||Universal fixing (5 kg)||5 kg||5 kg||5 kg||5 kg||5 kg||5 kg||10 kg||10 kg||10 kg||10 kg||10 kg|
|301104||Stabi Fix stabilisation strip||1 pcs.||2 pcs.||2 pcs.||3 pcs.||4 pcs.||5 pcs.||6 pcs.||7 pcs.||8 pcs.||9 pcs.||10 pcs.|