Prices incl. VAT plus shipping costs
Ready to ship today,
Delivery time appr. 1-3 workdays
- Order number: 308100-10
Economy kit QuickTherm underfloor heating for tiles with a low height of only 37 mm & quick installation in dry construction.
Laying under tiles in the bathroom is one of the most popular applications for underfloor heating. The installation of QuickTherm underfloor heating for tiles has a low installation height from 37 mm and therefore allows simple retrofitting of underfloor heating. The QuickFloor FL load distribution plate designed especially for tiles ensures a sturdy installation and good transfer of heat from the underfloor heating to the floor covering. Quick laying in dry construction and the low installation make this variation of QuickTherm underfloor heating particularly attractive for redevelopment.
The economy kit "underfloor heating for tiles" includes all the items you need for the QuickTherm underfloor heating system for later use with tiles on the load distribution layer QuickFloor FL. Please note that unfavorable room geometries can lead to increased wastage. If the fixed kit sizes do not match your building project, we gladly create an individual offer for your project.
You can inform yourself here about determining the control components (heating circuit distributor, actuator and thermostat) required for underfloor heating.
The following articles are included in the economy kit. You will find an exact overview of the article quantities in the "Components" tab.
QuickTherm system panels
The underfloor heating system panels combine the pipe duct and insulation (EPS DEO WLG 035) and ensure an easy installation. Thanks to the pipe ducts, the heating pipe must not be inconveniently fixed - the laying clearance of 166 mm is automatically maintained. The system panels are provided with predetermined breaking points and can therefore be customised to the room without the use of tools. The attached heat conducting plates made of aluminium ensure a quick, complete and even transfer of heat to the floor covering.
QuickTherm deflection bends
The deflection bends are used to guide the bend of the QuickTherm MVR heating pipe in the edge area. Just like the QuickTherm system panels, the pipe duct and insulation (EPS DEO WLG 035) are combined. 6 deflection bends are found on each bend plate, which can be individual separated without the use of tools due to the predetermined breaking point.
QuickTherm filling panel
The QuickTherm filling panel is a blank element and is used in the edge area and for unheated areas. The QuickTherm groove cutter can be used to cut pipe ducts into the filling panel to take the QuickTherm MVR heating pipe.
QuickTherm heat distribution plates
The aluminium QuickTherm heat distribution plates can be easily attached to the QuickTherm deflection bends and filling panels and ensure an even transfer of heat.
Heating pipe MVR
The heating pipe MVR with its diameter of 16x2.00 mm combines the benefits of aluminium and plastic. The pipe can be bent within it returning to its original position thanks to the inner aluminium layer. Furthermore, the aluminium reduces the thermal lengthways extension of the pipe considerably also making it suitable for use in underfloor heating in dry construction. Material: (PE-RT/AL/PE-RT)
Edge insulation strips
QuickTherm edge insulation strips consist of PE foam and ensure soundproofing between screeds (dry screed and wet screed) and other components such as walls for example. Due to its flexibility, it also compensates thermal length elongation in screeds.
Load distribution layer QuickFloor FL
QuickFloor FL is a heat conducting decoupling and load distribution panel made of polyester fibres optimised for tiles. Combined with QuickTherm underfloor heating, it ensures low floor installations from 37 mm and efficiently channels the heat from the underfloor heating to the floor covering. QuickFloor FL is laid in a group.
Tape for QuickFloor FL
Textile tape to seal and attach joins and impact points for the QuickFloor FL load distribution layer..
The universal fixing is used to adhere the system panels to the substrate and the QuickFloor FL panels on the heating elements. This is necessary for this installation in order to ensure stability.
StabiFix stabilisation strip
The StabiFix stabilisation strips are laid in doorways and below fixed installation such as kitchen units. They ensure an even more robust installation.
Please note: The economy kits are indivisible packages, a return of individual components is not possible.
|Load distribution layer:||QuickFloor FL|
|Installation height (without floor covering):||37 mm|
|suitiable floor covering:||Tiles|
The kit includes the following components
|Art-Nr.||Article||10 m²||15 m²||20 m²||30 m²||40 m²||50 m²||60 m²||70 m²||80 m²||90 m²||100 m²|
|301001||System panel||15 pcs.||22 pcs.||29 pcs.||44 pcs.||58 pcs.||73 pcs.||87 pcs.||102 pcs.||116 pcs.||131 pcs.||145 pcs.|
|301002||Deflection bends||3 pcs.||4 pcs.||5 pcs.||8 pcs.||10 pcs.||13 pcs.||15 pcs.||18 pcs.||20 pcs.||23 pcs.||25 pcs.|
|301003||Filling panel||3 pcs.||5 pcs.||6 pcs.||9 pcs.||12 pcs.||15 pcs.||18 pcs.||21 pcs.||24 pcs.||27 pcs.||30 pcs.|
|300016||Heating pipe MVR||60 m||100 m||120 m||200 m||250 m||300 m||360 m||430 m||500 m||550 m||600 m|
|301004||Heat distribution plate||10 pcs.||15 pcs.||20 pcs.||29 pcs.||39 pcs.||48 pcs.||58 pcs.||68 pcs.||77 pcs.||87 pcs.||96 pcs.|
|301100||Edge insulation strips (dry screed)||50 m||50 m||50 m||50 m||50 m||50 m||100 m||100 m||100 m||100 m||100 m|
|302000||QuickFloor FL||17 pcs.||26 pcs.||34 pcs.||51 pcs.||68 pcs.||85 pcs.||102 pcs.||119 pcs.||136 pcs.||153 pcs.||170 pcs.|
|302001||Tape for QuickFloor FL||36 m||48 m||60 m||84 m||120 m||144 m||168 m||192 m||240 m||252||276 m|
|301102||Universal fixing (5 kg)||5 kg||5 kg||5 kg||10 kg||10 kg||15 kg||15 kg||20 kg||20 kg||25 kg||25 kg|
|301104||Stabi Fix stabilisation strip||1 pcs.||2 pcs.||2 pcs.||3 pcs.||4 pcs.||5 pcs.||6 pcs.||7 pcs.||8 pcs.||9 pcs.||10 pcs.|