Prices incl. VAT plus shipping costs
Ready to ship today,
Delivery time appr. 1-3 workdays
- Order number: 308210-10
Economy kit GreenLine underfloor heating for laminate & parquet with a low height of only 32 mm & quick installation in dry construction.
The GreenLine underfloor heating for laminate and ready-to-lay parquet offers especially low installation heights of only 32 mm plus flooring. Due to the low installation height and the rapid laying, this floor heating can be retrofitted particularly well in the renovation. Laminate and ready-to-lay parquet are laid directly on the underfloor heating system with the footfall sound reducing thermal conductivity layer CompactFloor DIRECT. At the same time, CompactFloor DIRECT protects the substrate against moisture.
The economy kit "underfloor heating for laminate and parquet" includes all the items you need for the GreenLine underfloor heating system for later use with laminate or ready-to-lay parquet. Please note that unfavorable room geometries can lead to increased wastage. If the fixed kit sizes do not match your building project, we gladly create an individual offer for your project.
You can inform yourself here about determining the control components (heating circuit distributor, actuator and thermostat) required for underfloor heating.
The following articles are included in the economy kit. You will find an exact overview of the article quantities in the "Components" tab.
GreenLine system panels
GreenLine system panels consist of a 30 mm strong wood fibre insulation with pipe ducts. The pipe ducts are designed with a diameter of 16 mm for the QuickTherm heating pipe MVR. The heating pipe is easily fixed thanks to the clamping effect of pipe channels and the spacing of 16.7 cm is automatically maintained by the grid. The attached heat conducting plates made of aluminium ensure a fast and consistent heat dissipation on the flooring. All materials can be recycled separately.
GreenLine deflection bends
The deflection bends GreenLine consist of a 30 mm wooden fibre insulation and are used to guide the bend of the MVR heating pipe in the edge areas. Each panel consists of three deflection bends, which are cut into the wooden fibre insulation. Just like the system panels, pipe ducts and insulation were combined to simplify laying of the underfloor heating. Heat conducting sheets can also be applied to deflection bends if required.
GreenLine filling panel
GreenLine underfloor heating consists of easy-to-lay system elements. The GreenLine filling panel is a blank element of wooden fibres with a strength of 30 mm and is used in the edge area and for unheated areas. Pipe ducts for the heating pipe MVR can be cut in with a router..
Heat distribution plates
The aluminium heat distribution plates can be easily attached to the deflection bends and filling panels and ensure an even transfer of heat.
Heating pipe MVR
The heating pipe MVR with its diameter of 16x2.00 mm combines the benefits of aluminium and plastic. The pipe can be bent within it returning to its original position thanks to the inner aluminium layer. Furthermore, the aluminium reduces the thermal lengthways extension of the pipe considerably also making it suitable for use in underfloor heating in dry construction. Material: (PE-RT/AL/PE-RT)
Edge insulation strips
The edge insulation strips GreenLine consist of a double-layered corrugated board system with wax coating and assures acoustic decoupling between floors (dry screed and screed) and other components such as walls. Due to its flexibility, it compenssates the thermal expansion of screeds, so that it can be used for the standard-compliant production of edge joints.
Conductive layer CompactFloor DIRECT
CompactFloor DIRECT is a footfall sound insulating conductive layer for underfllor heating with a thickness of only 1.5 mm. It is simply rolled out on the underfloor heating, the joints are taped with aluminium tape. Afterwards, laminate and ready-to-lay parquet can be applied floating – without glueing and drying time.
Aluminium tape for CompactFloor DIRECT
The aluminium tape is used to join the edges of the CompactFloor DIRECT mats.
StabiFix stabilisation strip
The StabiFix stabilisation strips are laid in doorways and below fixed installation such as kitchen units. They ensure an even more robust installation.
Please note: The economy kits are indivisible packages, a return of individual components is not possible.
|Load distribution layer:||CompactFloor DIRECT|
|Installation height (without floor covering):||32 mm|
|suitiable floor covering:||Laminate, Parquet|
The kit includes the following components
|Art-Nr.||Article||10 m²||15 m²||20 m²||30 m²||40 m²||50 m²||60 m²||70 m²||80 m²||90 m²||100 m²|
|301201||System panel Greenline||15 pcs.||22 pcs.||29 pcs.||44 pcs.||58 pcs.||73 pcs.||87 pcs.||102 pcs.||116 pcs.||131 pcs.||145 pcs.|
|301202||Deflection bends GreenLine||5 pcs.||5 pcs.||10 pcs.||15 pcs.||20 pcs.||25 pcs.||30 pcs.||35 pcs.||40 pcs.||45 pcs.||50 pcs.|
|301203||Filling panel GreenLine||3 pcs.||5 pcs.||6 pcs.||9 pcs.||12 pcs.||15 pcs.||18 pcs.||21 pcs.||24 pcs.||27 pcs.||30 pcs.|
|300016||Heating pipe MVR||60 m||100 m||120 m||200 m||250 m||300 m||360 m||430 m||500 m||550 m||600 m|
|301004||Heat distribution plate||10 pcs.||15 pcs.||20 pcs.||29 pcs.||39 pcs.||48 pcs.||58 pcs.||68 pcs.||77 pcs.||87 pcs.||96 pcs.|
|301105||Edge insulation strips (dry screed)||25 m||25 m||25 m||50 m||50 m||50 m||75 m||75 m||100 m||100 m||100 m|
|302220||CompactFloor DIRECT||2 pcs.||2 pcs.||3 pcs.||4 pcs.||5 pcs.||7 pcs.||8 pcs.||9 pcs.||10 pcs.||12 pcs.||13 pcs.|
|302221||Aluminium tape for CompactFloor DIRECT||50 m||50 m||50 m||50 m||50 m||100 m||100 m||100 m||100 m||150 m||150 m|
|301104||Stabi Fix stabilisation strip||1 pcs.||2 pcs.||2 pcs.||3 pcs.||4 pcs.||5 pcs.||6 pcs.||7 pcs.||8 pcs.||9 pcs.||10 pcs.|