As an expert in underfloor heating, QuickTec not only offers drywall solutions for different floor coverings with its QuickTherm and GreenLine underfloor heating systems, but also control components for controlling the flow temperature. These include a manifold and an actuator for controlling your underfloor heating. A valve adapter and various Eurocone screws are also an integral part of the "Manifolds & Actuators" category in our online ...
In our online shop you will find everything you need for the installation and smooth operation of your underfloor heating, for example a thermostat or other connections and control components. In our section you will find, among other things, an analogue room thermostat in two different versions as well as three digital room thermostats with display and a radio thermostat. A connection strip, optionally as a Basic or Pro model, completes our w ...
Control stations allow the effective operation of underfloor heating systems that are to be used in combination with normal radiators. In our online shop you will find various mixing and control stations in the well-known QuickTec quality. We offer a compact control station - optionally also as a mini version - and a return temperature limiter box as well as a thermostat box. Useful accessories for control components round off the range.
Underfloor heating: Components for control according to EnEV
In Germany, according to the Energy Saving Ordinance (EnEV), for almost all buildings that are heated or air-conditioned, surface heating or cooling systems must ensure an operating mode that is optimally adapted to the external weather conditions as well as to the user requirements, while at the same time ensuring the highest economic efficiency and operational energy utilisation. Underfloor heating also requires a module to control the flow temperature, i.e. the temperature of the supplied heating water. According to § 12 EnEV, a sufficient heating water temperature must be available in the entire building depending on the outside temperature. In addition, the amount of heating water must be controlled individually in each room depending on the internal room temperature.
Thermostats and connections for controlling the underfloor heating system
To regulate the room temperature, a room thermostat is required that controls the actuators of the underfloor heating and enables individual room regulation. We offer you different variants of thermostats: analogue or with LC display, wired or with radio, optionally also programmable. Select the thermostat that suits your needs.
Manifolds and actuators
Our stainless steel heating circuit manifold with optical display and memory function is suitable for the hydraulic balancing of the individual heating circuits of the underfloor heating system. With our thermoelectric actuators, the individual heating circuits of the manifold can be opened and closed. One actuator is required per heating circuit. Distribution cabinets and valves round off the range in this category.
Mixing and control stations for setting the flow temperature
When underfloor heating is retrofitted or installed, often not all radiators are replaced. These then require a higher flow temperature than the underfloor heating. In such cases, our compact control station is ideally suited. You set the desired flow temperature at the thermostat knob. If the temperature falls below the setpoint temperature, the thermostatic valve allows warmer flow water of the high-temperature heating circuit to flow into the panel heating circuits, so that the flow temperature of the radiator circuit is mixed down to the low temperature level.
Do you have questions about the legal requirements for the control of your underfloor heating or the control components? We are happy to be at your disposal as an experienced contact partner. Contact us!