REQUEST PRICE

Fields with * are required
Congratulations!

You have found the Easter Egg! As a small gift, you will receive the following voucher code for redemption in our shop:


This voucher grants a discount of €0.00

Load distribution layers

When underfloor heating is installed in dry construction, no screed is distributed between the floor covering and the heating, but special load distribution boards are laid. In comparison, these load distribution layers convince with a much more effective heat conductivity and distribution, as they need less time to transfer the heat from the heating to the floor covering. We have various solutions available for you, all of which have been tested and approved with our QuickTherm and GreenLine underfloor heating systems and are suitable for different floor coverings. Whether laminate, parquet, tiles or carpet - at QuickTec you will find suitable load distribution plates.

When underfloor heating is installed in dry construction, no screed is distributed between the floor covering and the heating, but special load distribution boards are laid. In comparison, these... read more »
Close window
Load distribution layers

When underfloor heating is installed in dry construction, no screed is distributed between the floor covering and the heating, but special load distribution boards are laid. In comparison, these load distribution layers convince with a much more effective heat conductivity and distribution, as they need less time to transfer the heat from the heating to the floor covering. We have various solutions available for you, all of which have been tested and approved with our QuickTherm and GreenLine underfloor heating systems and are suitable for different floor coverings. Whether laminate, parquet, tiles or carpet - at QuickTec you will find suitable load distribution plates.

Close filters
from to
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
No results were found for the filter!
CompactFloor PRO 12 CompactFloor PRO 12
The universal conductive layer CompactFloor PRO 12 is the ideal complement to a QuickTherm underfloor heating. With its installation height of only 12 mm, the cement fibre based load distribution layer combines the advantage of a classic...
Content 0.859 m² (€57.04 * / 1 m²)
€49.00
CompactFloor DIRECT CompactFloor DIRECT
CompactFloor DIRECT combines conductive layer and acoustic mat and is the perfect footfall sound insulation for floating laminate and parquet. Due to the aluminium coating, heat is transfered directly to the floor covering and thus...
Content 8 m² (€7.86 * / 1 m²)
€62.90
CompactFloor EXPERT CompactFloor EXPERT
The conductivity layer CompactFloor EXPERT is a modern advancement of load distributions layers in drywall constructions. The fiber reinforced concrete elements offer an installation height of 20 mm and a high load capacity of 5,.0 kN /...
Content 0.186 m² (€61.83 * / 1 m²)
€11.50
QuickFloor FL QuickFloor FL
QuickFloor FL is a heat conducting decoupling and load distribution panel made of polyester fibres optimised for tiles. Combined with QuickTherm underfloor heating, it ensures low floor installations from 37 mm and efficiently channels...
Content 0.6 m² (€27.50 * / 1 m²)
€16.50

Load distribution layers: effective heat distribution of your underfloor heating system

CompactFloor PRO 12: Universal thermal conductive layer

This cement fibre-based load distribution panel has an impressive installation height of only 12 mm and is the ideal complement for QuickTherm or GreenLine underfloor heating. It has a very high thermal conductivity and ensures energy savings with its high thermal output.

CompactFloor EXPERT – Particularly resilient

Thanks to the fibre-reinforced concrete elements, CompactFloor EXPERT withstands high loads of up to 5.0 kN/m² and easily meets high requirements - for example in residential, office and commercial buildings. Even large tiles up to 1.20 m x 1.20 m are no problem.

CompactFloor DIRECT: Thermal conductive layer and acoustic mat in one

The combination of a thermally conductive layer and acoustic board is an ideal sound insulation underlay for floating parquet and laminate floors. The aluminium layer serves as a vapour barrier and protects the subfloor from moisture. In addition, heat is optimally transferred via the aluminium.
QuickFloor FL: Decoupling and load distribution board for tiles
This load distribution panel is made of polyester fibre and is suitable as a heat-conducting layer for tiles. QuickFloor FL can be laid as a composite.

QuickFloor TK for carpet and design coverings

For carpets and other floating floor coverings - linoleum, PVC, vinyl, etc. - the QuickFloor TK load distribution layer is the right solution. Thanks to the click connection, installation is simple and uncomplicated.

Would you also like to benefit from even heat distribution through load distribution layers? Then simply and conveniently order the desired items online via our shop. In Germany, we deliver free of shipping costs with a delivery time of 2-3 working days. Do you have any questions about a product or the ordering process? Simply contact us!

Viewed