Accessoires
When installing underfloor heating in dry construction, load distribution layers are usually used to provide the necessary stability and even heat distribution. In order to be able to correctly install these load distribution plates between the underfloor heating and the floor covering, QuickTec offers a wide range of accessories for load distribution layers.

When installing underfloor heating in dry construction, load distribution layers are usually used to provide the necessary stability and even heat distribution. In order to be able to correctly...
read more »
Close window
Accessoires
When installing underfloor heating in dry construction, load distribution layers are usually used to provide the necessary stability and even heat distribution. In order to be able to correctly install these load distribution plates between the underfloor heating and the floor covering, QuickTec offers a wide range of accessories for load distribution layers.

No results were found for the filter!
Dehnungsfugenprofil für Trockenestrich
QuickTherm Dehnungsfugenprofil für Trockenestrich wird bei der Verlegung von Fußbodenheizungen mit Trockenestrichen im Türdurchgang und zur Begrenzung großer Estrichflächen verwendet, um auftretende Spannungen zu kompensieren und...
Content
1 package(s)
€43.90
CompactFloor EXPERT epoxi glue
CompactFloor EXPERT epoxi glue is a solvent-free, thixotropic universal glue, which is mixed from two components (resin and hardener). It is supplied in containers as two buckets with matched mixing ratio, ie 4 kg of component A (resin)...
Content
6 Kilogramm
(€16.50
* / 1 Kilogramm)
€99.00
Jigsaw blade T 141 HM
The jigsaw blate T 141 HM is needed for cutting CompactFloor PRO panels. • material: Tungsten carbide tipped • suitable jigsaws: Bosch, AEG, Milwaukee, DeWalt, ELU, Festool, Hitachi, Mafell, Makita, Metabo, Protool • area of application:...
CompactFloor PRO hybrid glue
CompactFloor PRO hybrid glue ist needed for the installation of CompactFloor PRO conductive layers. The hybrid is solvent-free and ensures a rapid full curing. • content: 310 ml for approx. 5 m² CompactFloor PRO • skin formation: approx....
Content
0.31 litre
(€58.06
* / 1 litre)
€18.00
Impact sound insulation 8/6
The QuickThermfootfall sound insulation comes in a structure of QuickTherm underfloor heating used with floating screed. It is installed under the system elements of the underfloor heating. The 8 mm thick roll is made of extruded,...
Content
62.5 m²
(€12.72
* / 1 m²)
€795.00
Tape for QuickFloor FL
Textile tape to seal and attach joins and impact points for the QuickFloor FL load distribution layer. Available in sizes: • 12 metres (roll) and • 120 metres (roll)
Content
12 by the meter
(€3.08
* / 1 by the meter)
€37.00
Universal fixing
Depending on the installation version of QuickTherm underfloor heating, system elements and/or additional heat insulation must be attached to the base. Universal fixing is used in this case. Eco Fix universal fixing is an easy to...
Content
5 Kilogramm
(€19.80
* / 1 Kilogramm)
€99.00
Aluminimum tape for acoustic mat
CompactFloor DIRECT mats can be simply and safely fixed to the join edges with the aluminium coated adhesive tape. • Width: 50 mm • Length: 50 m
Content
50 by the meter
(€0.44
* / 1 by the meter)
€22.00
Separating foil
QuickTherm separating foil made of kraft paper reinforced on both sides serves as a separating layer between QuickTherm underfloor heating and various load distribution layers. The foil is used, for example, in combination with a wet...
Content
100 m²
(€1.60
* / 1 m²)
€160.00
Adhesive tape for separating foil
The QuickTherm separating foil can be easily applied with the 50 mm PP adhesive tape. • Roll á 66 m
Content
66 by the meter
(€0.03
* / 1 by the meter)
€2.20
Expansion join profile
QuickTherm expansion join profiles are used for laying underfloor heating with wet screeds in door passages and as a border to large screed areas to compensate for any tension and prevent the transfer of sound. • Dimensions: 1800 x 10 x...
Accessories for the CompactFloor PRO heat-conducting layer
If you have chosen our CompactFloor PRO heat-conducting layer, you will need the appropriate installation adhesive for the installation. Our CompactFloor PRO hybrid adhesive is solvent-free and ensures rapid curing. One bottle of adhesive is sufficient for an area of 5 m². You will also need suitable tools to cut the individual elements of the heat-conducting layer to the desired size. The T 141 HM jigsaw blade is the right solution in this case. It is made of fully hardened high-performance cutting steel HSC with carbide teeth and is suitable for GRP, plasterboard and cement fibreboard. It is compatible with almost all jigsaws from popular manufacturers - such as Bosch, Hitachi, AEG, or Metabo.
Accessories for laying with screed
In our range for load distribution layers, we also have suitable accessories for the installation of QuickTherm underfloor heating with floating screed. These include the impact sound insulation sheet 8/6. The approx. 8 mm thick roll (unloaded) is laid under the system elements of the underfloor heating and consists of extruded polyethylene foam that is insensitive to moisture. Measuring 1.25 x 50 m, one sheet is sufficient for an area of 62.5 m². Please note that our impact sound insulation membrane is only suitable for underfloor heating with screed. We also supply a separating foil made of kraft paper coated on both sides, which is used as a separating layer between the QuickTherm underfloor heating and the various load distribution layers - for screed tiles, for example. You will also find suitable adhesive tape for the separating foil, which is easy to bond, in our portfolio.
Contact us and find out about suitable accessories for the different load distribution layers. We will be happy to advise you with our know-how and look forward to your enquiry!